Part Number Hot Search : 
PSMD50E G3020 DS1976 22100 TC2696 MAX4800 DT54FCT 150LR80A
Product Description
Full Text Search
 

To Download 2SJ36009 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 2SJ360
TOSHIBA Field Effect Transistor Silicon P Channel MOS Type (L --MOSV)
2
2SJ360
High Speed, High current Switching Applications Chopper Regulator, DC-DC Converter and Motor Drive Applications
4-V gate drive Low drain-source ON resistance High forward transfer admittance Low leakage current Enhancement mode : RDS (ON) = 0.55 (typ.) : |Yfs| = 0.9 S (typ.) Unit: mm
: IDSS = -100 A (max) (VDS = -60 V) : Vth = -0.8 to -2.0 V (VDS = -10 V, ID = -1 mA)
Absolute Maximum Ratings (Ta = 25C)
Characteristics Drain-source voltage Drain-gate voltage (RGS = 20 k ) Gate-source voltage Drain current Drain power dissipation Drain power dissipation Channel temperature Storage temperature range (Note 2) DC (Note 1) Symbol VDSS VDGR VGSS ID IDP PD PD Tch Tstg Pulse (Note 1) Rating -60 -60 20 -1 -4 0.5 1.5 150 -55 to 150 Unit V V V A A W W C C
JEDEC JEITA TOSHIBA
SC-62 2-5K1B
Weight: 0.05 g (typ.) Note 1: Ensure that the channel temperature does not exceed 150C. Note 2: Mounted on a ceramic substrate (25.4 mm x 25.4 mm x 0.8 mm) Note 3: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
Thermal Characteristics
Characteristics Thermal resistance, channel to ambient Symbol Rth (ch-a) Max 250 Unit C / W
This transistor is an electrostatic-sensitive device. Please handle with caution.
1
2009-09-29
2SJ360
Marking
Note 4: A line to the right of a Lot No. identifies the indication of product Labels. Without a line: [[Pb]]/INCLUDES > MCV With a line: [[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]] Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. The RoHS is the Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Part No. (or abbreviation code)
Z
Lot No.
8
Note 4
Electrical Characteristics (Ta = 25C)
Characteristics Gate leakage current Drain cut-off current Drain-source breakdown voltage Gate threshold voltage Drain-source ON resistance Forward transfer admittance Input capacitance Reverse transfer capacitance Output capacitance Rise time Symbol IGSS IDSS V (BR) DSS Vth RDS (ON) |Yfs| Ciss Crss Coss tr
VGS 0V -10V ID = -0.5A VOUT RL = 60 50
Test Condition VGS = 16 V, VDS = 0 V VDS = -60 V, VGS = 0 V ID = -10 mA, VGS = 0 V VDS = -10 V, ID = -1 mA VGS = -4 V, ID = -0.5 A VGS = -10 V, ID = -0.5 A VDS = -10 V, ID = -0.5 A
Min -60 -0.8 0.5
Typ. 0.86 0.55 1.0 155 22 75 17
Max 10 -100 -2.0 1.2 0.73
Unit A A V V S
VDS = -10 V, VGS = 0 V, f = 1 MHz

pF
Turn-on time Switching time Fall time
ton tf toff Qg Qgs Qgd
20
ns
20
Turn-off time Total gate charge (Gate-source plus gate-drain) Gate-source charge Gate-drain ("miller") charge
VDD -30V Duty 1%, tw = 10s

100 6.5 4.5 2.0
nC
VDD -48 V, VGS = -10 V, ID = -1 A

Source-Drain Ratings and Characteristics (Ta = 25C)
Characteristics Continuous drain reverse current (Note 1) Pulse drain reverse current (Note 1) Forward voltage (diode) Reverse recovery time Reverse recovery charge Symbol IDR IDRP VDSF trr Qrr Test Condition IDR = -1 A, VGS = 0 V IDR = -1 A, VGS = 0 V dIDR / dt = 50 A / s Min Typ. 50 45 Max -1 -4 1.8 Unit A A V ns nC
2
2009-09-29
2SJ360
ID - VDS
-1.0 Common source Ta = 25C Pulse test -10 -8 -6 -4 -4.5 -5 -3.5 -1.6 -2.0 -10 -3.8 -5 -6 -8 -4
ID - VDS
Common source Ta = 25C Pulse test -3.5 -3.3
-0.8
(A)
ID
-0.6
ID Drain current
(A)
-3 -1.2 -0.8
Drain current
-0.4
-3 -2.8
-0.2
VGS = -2.5 V
-0.4 VGS = -2.5 V
0 0
-0.2
-0.4
-0.6
-0.8
-1.0
0 0
-2
-4
-6
-8
-10
Drain-source voltage
VDS
(V)
Drain-source voltage
VDS
(V)
ID - VGS
-2.0 Common source VDS = -10 V Pulse test Tc = -55C 100 -2.0
VDS - VGS
Common source Ta = 25C Pulse test
-1.6
(V) VDS Drain-source voltage
25
-1.6
ID (A)
-1.2
-1.2 ID = -2 A -0.8 -1.5 -1.0 -0.4 -0.5
Drain current
-0.8
-0.4
0 0
-1
-2
-3
-4
-5
0 0
-4
-8
-12
-16
-20
Gate-source voltage
VGS
(V)
Gate-source voltage
VGS
(V)
|Yfs| - ID
10 Common source VDS = -10 V Pulse test 10 Common source Ta = 25C Pulse test
RDS (ON) - ID
Forward transfer admittance Yfs (S)
3 Tc = -55C
Drain-source ON resistance RDS (ON) ()
5
5
3
100 1
25
1
VGS = -4 V -10
0.5 0.3 -0.1
0.5 0.3 -0.1
-0.3
-0.5
-1
-3
-5
-10
-0.3
-0.5
-1
-3
-5
-10
Drain current ID (A)
Drain current ID (A)
3
2009-09-29
2SJ360
RDS (ON) - Ta
-3 Common source 2.0 Pulse test ID = -2 A Common source Ta = 25C Pulse test -10 -5
IDR - VDS
Drain reverse current IDR (A)
Drain-source ON resistance RDS (ON) ( )
1.6
-1.5 -1.0
-1 -0.5 -0.3
1.2 VGS = -4 V 0.8 -1.5
-0.5 ID = -2 A
-3
-0.1 -0.05 -0.03 -1 0 VGS = 1 V
-1.0 -0.5 0.4 VGS = -10 V 0 -80 -40 0 40 80 120 160
-0.01 0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
Ambient temperature Ta (C)
Drain-source voltage
VDS
(V)
Capacitance - VDS
1000 -5
Vth - Ta
Common source VDS = -10 V ID = -1mA Pulse test
500
-4
(pF)
Gate threshold voltage Vth (V)
-100
300 Ciss 100
Capacitance C
-3
-2
50 30 Common source VGS = 0 V f = 1 MHz Ta = 25C -0.3 -1 -3 -10 -30
Coss
-1 Crss 0 -80 -40 0 40 80 120 160
10 -0.1
Drain-source voltage
VDS (V)
Ambient temperature Ta (C)
PD - Ta
2.0 25.4mmx25.4mmx0.8mm Mounted on ceramic substrate Single
Drain power dissipation PD (W)
1.5
1.0
0.5
0 0
40
80
120
160
200
Ambient temperature Ta (C)
4
2009-09-29
2SJ360
rth - tw
500 300 Single pulse Single 15 x 15 x 0.8 100 50 30 Mounted on ceramic substrate 40mmx50mmx0.8mm 20 x 30 x 0.8
Transient thermal impedance rth (ch-a)
10 5 3
1 1m
10 m
100 m
1
10
100
1000
Pulse width
tw
(s)
SAFE OPERATING AREA
-10 -5 -3 ID max (continuous) 10 ms * ID max (pulsed) * 1 ms *
(A) Drain current ID
-1 -0.5 -0.3 -0.1 -0.05
DC operation Ta = 25C
-0.03 *: Single nonrepetitive pulse Tc = 25C Curves must be derated -0.01 linearly with increase in temperature. -0.005 -0.1 -1 -0.3 -3
VDSS max -10 -30 -100
Drain-source voltage
VDS (V)
5
2009-09-29
2SJ360
RESTRICTIONS ON PRODUCT USE
* Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. * This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. * Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application that Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. * Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact ("Unintended Use"). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. * Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. * Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. * The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. * ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. * Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. * Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations.
6
2009-09-29


▲Up To Search▲   

 
Price & Availability of 2SJ36009

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X